This sling mount pin is designed to replace one of the receiver push pins to provide for a single point sling mount. Sling loop is permanently attached to the pin and is not a quick detach sling loop. We recommend installing this in place of the upper push pin that is nearest the trigger.
If you have a Gen 1 or Gen 2 Vector with the integrated hinge mount on the upper housing, this sling mount pin may also be used to replace the pivot pin for the hinged stock or fixed stock adapter.
Pin will fit a 7mm diameter hole with 35mm depth.
Note: This pin is not for use with the ambidextrous folding stock adapter for the Gen 2.1 Vector.